Omar Abdelqader, Rashid K. Abu Al-Rub, Mohamed I Hassan Ali, Atmospheric air freshwater using TPMS compact heat exchangers, Applied Thermal Engineering 246 (2024) 122979.

Essam Nabil Ahmed and Alessandro Bottaro, Flow through porous metamaterials formed by TPMS-based unit cells: Effects of Advection, European J of Mechanics/B Fluids 100 (2023) 202-207.

Oraib Al-Ketan, Mohamed Ali, Mohamad Khalil, Reza Rowshan, Kamran A. Khan, Rashid K. Abu Al-Rub, Forced convection computational fluid dynamics analysis of architected and three-dimensional printable heat sinks based on triply periodic minimal surfaces, J of Thermal Science and Eng. Appl. 13 (2021) 021010.

Moza Alteneiji, Mohamed I. Hassan Ali, Kamran A. Khan, Rashid K. Abu Al-Rub, Heat transfer effectiveness characteristics maps for additively manufactured TPMS compact heat exchangers, Energy Storage and Saving 1 (2022) 153-161.

Danish Ansari and Christophe Duwig, A gyroid TPMS heat sink for electronic cooling, Energy Conversion and Management 319 (2024) 118918.

Mohammad Asif and Carlos A. Grande, TPMS contactors designed with imprinted porosity: Numerical evaluation of momentum and energy transport, Ind. Eng. Chem. Reservation. 61 (2022) 18556-18566.

Reza Attarzadeh, Seyed-Hosein Attarzadeh-Niaki, and Christophe Duwig, Multi-objective optimization of TPMS-based heat exchangers for low-temperature waste heat recovery, Applied Thermal Engineering 212 (2022) 118448.

Nada Baobaid, Mohamed I Ali, Kamran A. Khan, Rashid K. Abu Al-Rub, Case Studies in Thermal Engineering 33 (2022) 101944.

Abdallah Barakat, Yi Pan, BeiBei Sun, Comparative heat transfer performance of TPMS structures: Spotlight on Fisch Koch S versus Gyroid, Diamond and SplitP lattices, E3S Web of Conferences 560 (2024) 01009.

Neel Baxi, Aarya Patel, and Pavan Kumar Gurrala, Heat transfer enhancement through triply periodic minimal surfaces, In: Bhattacharyya, S., Verma, S., Harikrishnan, A.R. (eds) Fluid Mechanics and Fluid Power (Vol. 3) FMFP 2021. Lecture Notes in Mechanical Engineering. Springer, Singapore.

Juergen. Biener, Jianchao Ye, and Sangil Kim, Enhanced biomimetic three-dimensional nanoporous gyroid membrane for high efficiency carbon dioxide absorption, LLNL-TR-847967. (2023) TCF-21-24965.

F.S.L. Bobbert, K. Lietaert, A.A. Eftekhari, B. Pouran, S.M. Ahmadi, H. Weinans, A.A. Zadpoor, Additively manufactured metallic porous biomaterials based on minimal surfaces: A unique combination of topological, mechanical, and mass transport properties, Acta Biomaterialia 53 (2017) 572-584.

Oliver Bonner-Hutton, Bastian Busch, Yifan Lv, Alan Caughley, Rodney Badcock, Grant Lumsden, Hubertus Weijers, and Sarat Singamneni, Analysis of gyroid heat exchangers for superconducting electric motors, Materials Today: Proceedings (2023).

Giovanni Brambati, Manfredo Guilizzoni and Stefano Foletti, Convective heat transfer correlations for Triply Periodic Minimal Surfaces based heat exchangers, Applied Thermal Engineering 242 (2024) 122492.

S. Catchpole-Smith, R.R.J. Selo, A.W. Davis, I.A. Ashcroft, C.J. Tuck and A. Clare, Additive Manufacturing 30 (2019) 100846.

Fei Chen, Xin Jiang, Chenxi Lu, Yangwei Wang, Pin Wen and Qiang Shen, Heat transfer efficiency enhancement of gyroid heat exchanger based on multidimensional gradient structure design, Intl. Comm. in Heat and Mass Transfer 149 (2023) 107127.

Zhaoqi Chen, Pengzhan Liu, Tanyang Wu, Guoju Bai, Zijing Xia, and Ping Han, Parametric design and performance evaluation of TPMS porous vitrified bond diamond grinding wheel using digital light processing, Ceramics Intl. 50 (2024) 41831-41847.

Zhilong Cheng, Ruina Xu, Pei-Xue Jiang, Morphology, flow and heat transfer in triply periodic minimal surface based porous structures, Intl. J. of Heat and Mass Transfer 170 (2021) 120902.

Zhilong Cheng, Xiaoyang Li, Ruina Xu, and Peixue Jiang, Investigations on porous media customized by triply periodic minimal surface: Heat transfer correlations and strength performance, Intl. Comm. in Heat and Mass Transfer 129 (2021) 105713.

S.V. Chernyshikhin, S.N. Zhevnenko, V.S. Suvorova, I.A. Pelevin, B.O. Zotov, L.V. Fedorenko, V. Yu Egorov, A. Kavousi Sisi, P. Yu Piskarev, V.V. Ruzanov, and A.A. Gromov, Mechanical and thermal properties of Gyroid-based W-Cu composites produced via laser powder bed fusion assisted by infiltration, Intl. J. of Refractory Metals and Hard Materials 122 (2024) 106699.

Yue Hao Choong, Manickavasagam Krishnan, and Manoj Gupta, Recent advances in the 3D printing of pure copper functional structures for thermal management devices, Technologies (2023) 11: 141.

Lalith Kannah Dharmalingam, Vikrant Aute, and Jiazhen Ling, Review of triply periodic minimal surface (TPMS) based heat exchanger designs, Intl. Refrigeration and Air Conditioning Conf. (2022). Paper 2393.

Tisha Dixit, Ebrahim Al-Hajri, Manosh C. Paul, Perumal Nithiarasu, and S. Kumar, High performance, microarchitected, compact heat exchanger enabled by 3D printing, Applied Thermal Engineering 210 (2022) 118339.

Esa Dube Kerme, Mahsa Hajialibabei, M. Ziad Saghir, and O. El-Ketan, Experimental investigation of porous gyroid structure: Effect of cell size and porosity on performance, Thermal Science and Engineering Progress 53 (2024) 102728.

Krzysztof Dutkowski, Marcin Kruzel, and Krzysztof Rokosz, Review of the state-of-the-art uses of minimal surfaces in heat transfer, Energies 15 (2022) 7994.

Issam El Khadiri, Mohamed Abouelmajd, Maria Zemzami, Nabil Hmina, Manuel Lagache, Soufiane Belhouideg, Comprehensive analysis of flow and heat transfer performance in triply periodic minimal surface (TPMS) heat exchangers based on Fischer-Koch S, PMY, FRD, and Gyroid structures, Intl. Comm. in Heat and Mass Transfer 156 (2024) 107617.

Tim Femmer, Alexander J.C. Kuehne and Matthias Wessling, Estimation of the structure dependent performance of 3-D rapid prototyped membranes, Chem. Eng. J. 273 (2015) 438-445.

Jiawei Feng, Jianzhong Fu, Ce Shang, Zhiwei Lin, and Bin Li, Sandwich panel design and performance optimization based on triply periodic minimal surfaces, Computer-Aided Design 115 (2019) 307-322.

William Fritsch and Nicolas Pierre Martin, Triply periodic minimal surfaces lattice neutronics scoping studies, United States: N. p., 2023.

Yucheng Fu, Jie Bao, Chao Wang, Rajesh Kumar Singh, and Zhijie Xu, CFD Study of countercurrent flow in triply periodic minimal surfaces with CO2BOL solvent, Richland, WA: Pacific Northwest National Laboratory.

Toshiya Fukuzaki, Kiyoshi Kinefuchi, Yutaka Umemura, Koichi Okita and Hitoshi Sakai, Comparison of vapor cooling characteristics of a triply periodic minimal surface and other channel geometries, Mech. Eng. J. 10 (2023).

Mohamed G. Gado and Shinichi Ookawara, 3D-printed triply periodic minimal surface (TPMS) structures: Towards potential application of adsorption-based atmospheric water harvesting, Energy Conversion and Management 297 (2023) 117729.

Mohamed G. Gado, Thermal management and heat transfer enhancement of electronic devices using integrative phase change material (PCM) and triply periodic minimal surface (TPMS) heat sinks, Applied Thermal Engineering 258 (2025) 124504.

Eleonora Gajetti, Massimiliano Bonesso, Alessandro Bruschi, Francesco Fanale, Saul Garavaglia, Gustavo Granucci, Alessandro Moro, Adriano Pepato, Afra Romano, and Laura Savoldi, A new efficient mirror cooling for the transmission line of fusion reactor ECH systems based on triply periodic minimal surfaces, IEEE Trans. on Plasma Science, 99 (2024) 1-7.

Shiming Gao, Shuo Qu, Junhao Ding, Hui Liu, and Xu Song, Influence of cell size and its gradient on thermo-hydraulic characteristics of triply periodic minimal surface heat exchangers, Applied Thermal Engineering 232 (2023) 121098.

Shiming Gao, Junhao Ding, Shuo Qu, Hui Liu and Xu Song, Numerical and experimental investigation of additively manufactured shell-lattice copper heat exchanger, Intl. Comm. in Heat and Mass Transfer 147 (2023) 106976.

Alper Mete Genc, Ceren Vatansever, Meltem Kocak, and Ziya Haktan Karadeniz, Investigation of additively manufactured triply periodic minimal surfaces as an air-to-air heat exchanger, CLIMA 2022 Conference.

Reduan Asbai-Ghoudan, Sergio Ruiz de Galarreta, and Naiara Rodriguez-Florez, Analytical model for the prediction of permeability of triply periodic minimal surfaces, J of the Mechanical Beh. of Biomedical Materials 124 (2021) 104804.

L. Giorleo, S. Basu, and E. Piana, Acoustic performances of triply periodic minimal surfaces fabricated by additive manufacturing: Effects of cell geometry, aspect ratio, and wall thickness, PREPRINT.

Janith Godakawela, Amulya Lomte, and Bhisham Sharma, Sound absorption in uniform and layered gyroid and diamond triply periodic minimal surface porous absorbers, PREPRINT.

Yuheng Gu, Yudong Ding, Qiang Liao, Qian Fu, Xun Zhu, and Hong Wang, Analysis of convective condensation heat transfer for moist air on a three-dimensional finned tube, Applied Thermal Engineering 195 (2021) 117211.

Zhonghao Gu, Kang Yang, Houli Liu, Xiong Zhou, Hong Xu, and Li Zhang, Enhancing heat transfer performance of aluminum-based vapor chamber with a novel bionic wick structure fabricated using additive manufacturing, Applied Thermal Engineering 247 (2024) 123076.

Fabian Guenther, Franz Hirsch, Stefan Pilz, Markus Wagner, Annett Gebert, Markus Kaestner, and Martina Zimmermann, Materials and Design 222 (2022) 111036. Jitai Han, Kui Zhu, Peng Li, and Yin Li, Numerical modeling and performance analysis of anode with porous structure for aluminum-air batteries, Electrochemistry Comm. 164 (2024) 107748.

Tomoki Hirokawa and Hajime Miyata, Experimental investigation on pressure drop characteristics of adiabatic two-phase flow in a Gyroid-structured channel, Intl. J. of Multiphase Flow 181 (2024) 104982.

Yiqun Hu, Zilong Zhang, Yuhang Zhang, Lei Yuan, and Re Xia, Torsional mechanical characterisation of triply periodic minimal surface porous structures, PREPRINT.

Hao Hua and Tingli Jia, Fabricating without CAD models: Experiments with G-code and KUKA KRL, in Protocols, Flows and Glitches, Proceedings of the 22nd Intl. Conf. of the Assoc. for Computer-Aided Architectural Design Research in Asia (2017) 883-893.

M. Iwaniszyn, K. Sindera, J. Maszybrocka, P.J. Jodlowski, 3D-printed triply periodic minimal surface (TPMS) structures as catalyst carriers, Chem. Eng. Research and Design 209 (2024) 37-51.

Jaisree Iyer, Thomas Moore, Du Nguyen, Pratanu Roy, and Joshuah Stolaroff, Heat transfer and pressure drop characteristics of heat exchangers based on triply periodic minimal and periodic nodal surfaces, Applied Thermal Engineering 209 (2022) 118192.

Yu Jiang, Jiangbei Hu, Shengfa Wang, Na Lei, Zhongxuan Luo, and Ligang Liu, Meshless optimization of triply periodic minimal surface based on two-fluid heat exchanger, Computer-Aided Design 162 (2023) 103554.

Mengxia Jin, Qixiang Feng, Xiaojie Fan, Zhichao Luo, Qian Tang, Jun Song, Shuai Ma, Yunfei Nie, Peng Jin, and Mingqiang Zhao, Investigation on the mechanical properties of TPMS porous structures fabricated by laser powder bed fusion, J of Manufacturing Processes 76 (2022) 559-574.

Y. Jung and S. Torquato, Fluid permeabilities of triply periodic minimal surfaces, Physical Review E 72 (2005) 056319.

Ki-Ju Kang, Wire-woven cellular metals: The present and future, Progress in Materials Science 69 (2015) 213-307.

Mohamad Khalil, Mohamed I. Hassan Ali, Kamran A. Khan, and Rashid Abu Al-Rub, Forced convection heat transfer in heat sinks with topologies based on triply periodic minimal surfaces, Case Studies in Thermal Engineering 38 (2022) 102313.

Daejung Kim, Chenxi Peng, Jonathan Tran, and Jimmy Philip, An experimental study of pressure drop and fluid flow in triply periodic minimal surface (TPMS) scaffolds, 12th Intl. Symp. on Turbulence and Shear Flow Phenomena (2022).

Jiho Kim and Dong-Jin Yoo, 3D printed compact heat exchangers with mathematically defined core structures, J. of Computational Design and Engineering 7(4) (2020) 527-550.

Krzysztof Kus, Marcin Wojcik, Ziemowit Malecha, Zbigniew Rogala, Numerical and experimental investigation of the gyroid heat exchanger, Intl. J. of Heat and Mass Transfer 231 (2024) 125882.

Wei-Hsiang Lai and Abdul Samad, Development and flow optimization of Gyroid- based additive manufacturing heat exchanger: Both computational and experimental analyses, PREPRINT.

Luthfan Adhy Lesmana and Muhammad Aziz, Triply periodic minimal surface-based heat exchanger as metal hydride hydrogen storage reactor, Chem Engineering Trans. 88 (2021) 229-234.

Luthfan Adhy Lesmana, Chenxi Lu, Fei Chen, and Muhammad Aziz, Topology optimization of gyroid structure-based metal hydride reactor for high-performance hydrogen storage, Thermal Sci. and Engineering Progress, 50 (2024) 102533.

Luthfan Adhy Lesmana, Chenxi Lu, Fei Chen, and Muhammad Aziz, Triply periodic minimal surface gyroid structure as effective metal hydride hydrogen storage reactor: Experimental study, Thermal Sci. and Engineering Progress 42 (2023) 101903.

Luthfan Adhy Lesmana and Muhammad Aziz, Strategic integration of metamaterials properties and topology optimization of Gyroid metal hydride reactor for high-density hydrogen storage, Energy 308 (2024) 133018.

Wenguang Li, Weihong Li, and Zhibin Yu, Heat transfer enhancement of water-cooled triply periodic minimal surface heat exchangers, Applied Thermal Engineering 217 (2022) 119198.

Weihong Li, Guopeng Yu, and Zhibin Yu, Bioinspired heat exchangers based on triply periodic minimal surfaces of supercritical CO2 cycles, Applied Thermal Engineering 179 (2020) 115686.

Dong Liang, Chenwei Shi, Weihong Li, Wei Chen, and Minking K. Chyu, Design, flow characteristics and performance evaluation of bioinspired heat exchangers based on triply periodic minimal surfaces, Intl. J. of Heat and Mass Transfer 201 (2023) 123620.

L. Lopes, M. Almeida and D. Reis, Influence of 3D microstructure for improving the thermal performance of building facades, IOP Conf. Ser.: Earth Environ. Sci. 1196 (2023) 012064.

Ji-Wang Luo, Li Chen, Ting Min, Feng Shan, Qinjun Kang, and WenQuan Tao, Macroscopic transport properties of Gyroid structures based on pore-scale studies: Permeability, diffusivity and thermal conductivity, Intl. J. of Heat and Mass Transfer 146 (2020) 118837.

Zhenhuan Lv, Wenqiang Yang, Li Yao, Xiang Chen, Junyang Zhou, Ruoyu Li, Hui Mei, Laifei Cheng, and Litong Zhang, Electromagnetic response mechanism of BaTiO3-based metamaterials: Transition between microwave absorption and shielding capacity, PREPRINT.

Duc Vu Ly, Yuga Kishi, Tadachika Nakayama, and Noboru Yamada, Thermal performance of polymer gyroid heat exchangers combined with phase change materials as a latent heat thermal energy storage system: An experimental investigation, Intl. J. of Heat and Mass Transfer 226 (2024) 125531.

Shuai Ma, Qian Tang, Qixiang Feng, Jun Song, Xiaoxiao Han, and Fuyu Guo, Mechanical behaviours and mass transport properties of bone-mimicking scaffolds consisted of gyroid structures manufactured using selective laser melting, J of the Mech. Beh. of Biomedical Materials 93 (2019) 158-169.

Dalia Mahmoud, Shekhar Rammohan Singh Tandel, Mostafa Yakout, Mohamed Elbestawi, Fabrizio Mattiello, Stefano Paradiso, Chan Ching, Mohammed Zaher, and Mohamed Abdelnabi, Enhancement of heat exchanger performance using additive manufacturing of gyroid lattice structures, Intl. J. of Advanced Manufacturing Technology (2023) 126: 4021-4036.

Nicolas Martin, Seokbin Seo, Silvino Balderrama Prieto, Casey Jesse, and Nicolas Woolstenhulme, Reactor physics characterization of triply periodic minimal surface-based nuclear fuel lattices, Progress in Nuclear Energy 165 (2023) 104895.

Mohamad Modrek, Asha Viswanath, Kamran A. Khan, Mohamed I. Hassan Ali, and Rashid K. Abu Al-Rub, An optimization case study to design additively manufacturable porous heat sinks based on triply periodic minimal surface (TPMS) lattices, Case Studies in Thermal Engineering 36 (2022) 102161.

Katarina Monkova, Peter Monka, Ivana Zetkova, Pavel Hanzl, and Dusan Mandulak, Three approaches to the Gyroid structure modelling as a base of lightweight component produced by additive technology, Intl. Conf. on Computational Modelling, Simulation and Appl. Math. (2017).

H. Nguyen-Xuan, Kim Q. Tran, Chien H. Thai, and Jaehong Lee, Modelling of functionally graded triply periodic minimal surface (FG-TPMS) plates, Composite Structures 315 (2023) 116981.

Seyed A. Niknam, Mehdi Mortazavi, and Dongsheng Li, Additively manufactured heat exchangers: A review on opportunities and challenges, Intl. J. of Advanced Manufacturing Technology 112 (2021) 601-618.

Seo-Hyeon Oh, Chan-Hee An, Bomin Seo, Jungwoo Kim, Chang Yong Park, and Keun Park, Functional morphology change of TPMS structures for design and additive manufacturing of compact heat exchangers, Additive Manufacturing 76 (2023) 103778.

Luis Guillermo Ornelas-Ramon, Arturo Gomez-Ortega, James Perez-Barrera, and Saul Piedra, Computational analysis and engineering modeling for the heat transfer and fluid flow through the Gyroid TPMS structure, PREPRINT.

Mats Overbeck, Sebastian Heimbs, Jan Kube, and Christian Huehne, Energy absorption properties of 3D-printed polymeric Gyroid structures for an aircraft wing leading edge, Aerospace 11 (2024) 801.

Kristopher Ray Simbulan Pamintuan, Harold Octavo Manga, and Aprilyn J. Balmes, Development of a 3D-printed spongy electrode design for microbial fuel cell (MFC) using Gyroid lattice, Int. J. Renew. Energy Dev. 13 (2024) 480-490.

Jiansheng Pan, Jianwei Wu, Yin Zhang, Hui Wang, and Jiubin Tan, Design and analyze of flexure hinges based on triply periodic minimal surface lattice, Precision Engineering 68 (2021) 338-350.

Andre Concalves Pereira Passos, Laminar flow and heat transfer in triply periodic minimal surfaces, MS Thesis (2019) Tecnico Lisboa.

Hao Peng, Feng Gao, and Wenjing Hu, Design, modeling and characterization of triply periodic minimal surface heat exchangers with additive manufacturing, in: Solid Freeform Fabrication 2019: Proc. of the 30th Annual Intl. Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2019, pp 2325-2337.

Chenyi Qian, Jiaxuan Wang, Xiang Qiu, Lixia Yan, Binbin Yu, Junye Shi, and Jiangping Chen, Numerical and experimental investigation of ultra-compact triply periodic minimal surface heat exchangers with high efficiency, Intl. J. of Heat and Mass Transfer 233 (2024) 125984.

Shanjith Raja, Dominika Hamulczuk, and Simon Dybeck Carlsson, Exploring a new energy-efficient way to heat water: Design of a heat exchanger for laundry machine applications produced using additive manufacturing, (2020) "https://odr.chalmers.se/handle/20.500.12380/302189?mode=full"

Surendra Singh Rathore, Balkrishna Mehta, Pradeep Kumar, and Mohammad Asfer, Flow characterization in triply periodic minimal surface (TPMS)-based porous geometries: Part 1 - Hydrodynamics, Transport in Porous Media (2023) 146: 669-701.

Syed Saarim Razi, Salman Pervaiz, Rahmat Agung Susantyoko and Mozah Alyammahi, Optimization of environment-friendly and sustainable polylactic acid (PLA)-constructed triply periodic minimal surface (TPMS)-based Gyroid structures, Polymers 16 (2024) 1175.

Simon Reid, Frederic Lecarpentier, Digby Symons, and Matthew Watson, Can 3D-printed catalysts improve hydrogen peroxide thruster performance? An experimental and numerical study, Chemical Engineering Science 302 (2025) 120783.

Benjamin Wynne Reynolds, Simulation of flow and heat transfer in 3D printable triply periodic minimal surface heat exchangers, PhD Diss. (2020) U of Canterbury, Christchurch, New Zealand.

Benjamin W. Reynolds, Conan J. Fee, Ken R. Morison, and Daniel J. Holland, Characterisation of heat transfer within 3D printed TPMS heat exchangers, Intl. J of Heat and Mass Transfer 212 (2023) 124264.

S. Richard, D. Tasso, M. Rajana, A. Saker, A. Ramirez Santos, C. Makhloufi, N. Meynet, B. Hary, S. Nardone, G. Marino, M. Thomas, C. Italiano, A. Vita, and F. Gallucci, Comparison of thermo-hydraulic performance among different 3D printed periodic open cellular structures, Chemical Engineering J. 492 (2024) 152005.

M. Z. Saghir and M. Yahya, Cooling lithium-ion batteries in the presence of triply periodic minimal surfaces structure, Applied Solar Energy (2024) 60: 357-369.

Mohamad Ziad Saghir, Jordan So, Heba Rasheed, and Dauren Ilesaliev, Forced convection in porous medium using triply periodical minimum surfaces, Fluids (2023) 8: 311.

Mohamad Ziad Saghir, Esa D. Kerme, Mahsa Hajialibabei, Heba Rasheed, Christopher Welsford, and Oraib Al-Ketan, Study of the thermal and hydraulic performance of porous block versus gyroid structure: Experimental and numerical approaches, Energies (2024) 17: 861.

Sean Samson, Phuong Tran, and Pier Marzocca, Design and modelling of porous gyroid heatsinks: Influences of cell size, porosity and material variation, Applied Thermal Engineering 235 (2023) 121296.

Muhammad Usman Shahid, Muhammad Mahabat Khan, and Muhammad Noman Shahid, Numerical investigation of the heat transfer rate and fluid flow characteristics of conventional and triply periodic minimal surface (TPMS)-based heat sinks, Eng. Proc. 75 (2024) 35.

Hossein Sheykhpoor, Hamidreza Gohari Darabkhani, and Abdul Waheed Awan, Improving efficiency of micro gas turbine systems by integration of combustor and recuperator using additive manufacturing techniques, Intl. J. of Advanced Manufacturing Technology (2023) 127: 23-44.

Jaeho Shim, Jaehyeok Dok, and Sang-in Park, Design framework based on implicit modeling for a compact heat exchanger with triply periodic minimal surface structures, J. of Mechanical Sci. and Tech. 38 (2024) 4485-4496.

Krishma Singal, Michael S. Dimitriyev, Sarah E. Gonzalez, A. Patrick Cachine, Sam Quinn, and Elisabetta A. Matsumoto, Programming mechanics in knitted materials, stitch by stitch, Nature Communications 15 (2024) 2622.

Nurshaun Sreedhar, Navya Thomas, Oraib Al-Ketan, Reza Rowshan, Hector H. Hernandez, Rashid K. Abu Al-Rub, and Hassan A. Arafat, Mass transfer analysis of ultrafiltration using spacers based on triply periodic minimal surfaces: Effects of spacer design, directionality and voidage, J. of Membrane Sci. 561 (2018) 89-98.

Lucija Stepanic, Josip Galic, Anastasios P. Vassilopoulos, Experimental and numerical investigation of an additively manufactured sandwich composite bridge deck utilizing Gyroid building blocks, Composit Structures 343 (2024) 118304.

Jingyang Sun, Xionghui Li, Hongwei Mao, Yuan Ma, Jinxin Liu, and Xuefeng Chen, Numerical analysis of the mechanism of porosity effect on the thermal-hydraulic performance of Gyroid-type TPMS structures in combined aero engines, PREPRINT.

Wei Tang, Changcheng Zou, Hua Zhou, Lihua Zhang, Yun Zeng, Licheng Sun, Yang Zhao, Minglei Yan, Juheng Fu, Jian Hu, Zhida Li, Ze Liu, Tao Wang, and Zhiqing Zhang, A novel convective heat transfer enhancement method based on precise control of Gyroid-type TPMS lattice structure, Applied Thermal Engineering 230 (2023) 120797.

Wei Tang, Juntao Guo, Fan Yang, Linwei Zeng, Xiongsheng Wang, Wengang Liu, Junjie Zhang, Changcheng Zou, Licheng Sun, Yun Zeng, Zhigang Zhang, Junheng Fu, and Yang Zhao, Performance analysis and optimization of the Gyroid-type triply periodic minimal surface heat sink incorporated with fin structures, Applied Thermal Engineering 255 (2024) 123950.

Alessio Quamori Tanzi, Antonio Cammi, Luca Marocco, and Laura Savoldi, Design of a 10 MW/m2-heat-flux removal system for a W7-X divertor tile using triply periodic minimal surfaces, PREPRINT.

Kim Q. Tran, Thinh D. Le, Nam V. Nguyen, and H. Nguyen-Xuan, Design of 3D rotating triply periodic minimal surface (RotTPMS) lattice plates: Meanings of crystalline rotations and porosity, Intl. J. of Mechanical Sciences 270 (2024) 109090.

Daniel Turner, Robert Howie and Phil Bland, The development of a next-generation latticed resistojet thruster for CubeSats, Aerospace 11 (2024) 714.
Davide Vigano, Riccardo Balzarotti, Oscar Santoliquido, Alice Rosa, Marco Pelanconi, Giovanni Bianchi, and Alberto Ortona, A preliminary investigation of gyroids made of W-Cu composite materials produced by investment casting into SiO2-based molds 3D-printed by stereolithography, Materials and Design 234 (2023) 112361.

Gerard L. Vignoles, Denis Rochais and Sylvain Chupin, Computation of the conducto-radiative effective heat conductivity of porous media defined by triply periodic minimal surfaces, Intl. J. of Thermal Sciences 159 (2021) 106598.

Isak Wadsoe and Simon Holmqvist, Additively manufactured heat exchangers: Development and Testing, Master Thesis Lund U. (2020).

Jiaxuan Wang, Chenyi Qian, Weicheng Xuan, Xiang Qiu, Binbin Yu, Junye Shi, and Jiangping Chen, Numerical and experimental investigation of additive manufactured heat exchanger based on triply periodic minimal surfaces, PREPRINT.

Jinghan Wang, Kai Chen, Min Zeng, Ting Ma, Qiuwang Wang, and Zhilong Cheng, Assessment of flow and heat transfer of triply periodic minimal surface based heat exchangers, Energy 282 (2023) 128806.

Shengfa Wang, Yu Jiang, Jiangbei Hu, Xin Fan, Zhongxuan Luo, Yongjin Liu, and Ligang Liu, Efficient Representation and Optimization of TPMS-based porous structures for 3D heat dissipation, Computer-Aided Design 142 (2022) 103123.

Weiwei Wang, Wei Guan, and Xuan Zou, Locally resonant seismic metamaterial with an ultrawide and ultralow-frequency bandgap designed from Gyroid-type triply periodic minimal surfaces, PREPRINT.

Xinglong Wang, Cheng Wang, Xin Zhou, Mingkang Zhang, Peiyu Zhang and Lei Wang, Innovative design and additive manufacturing of regenerative cooling thermal protection system based on the triply periodic minimal surface structure, Computer Modeling in Engineering and Sciences 123 (2020) 495-508.

Duston Wetzel, Paul Gailiunas, Moses Gaither-Ganim and William Holt, Triply periodic helical weaves, (2024).

Hong Xu, Wenhui Yu, Yuan Zhang, Suli Ma, Zhiyuan Wu, and Xiaohu Liu, Flow and heat transfer performance of bionic heat transfer structures with hybrid triply periodic minimal surfaces, Applied Energy 351 (2023) 121847.

Wei Xu, Huixin Liang, Hongtao Dai, Jianping Shi, Wenlai Tang, Baocheng Guo, Jiquan Yang, and Liya Zhu, Heat transfer characteristics of 3D printed heat exchangers based on triply periodic minimal surfaces, PREPRINT.

Meryem N. Yabaniguel and Tugrul Yazar, Production of Gyroid-like modular systems with non-linear robotic hotwire cutting, Automation in Construction 126 (2021) 103671.

Guanghan Yan, Mingrui Sun, Zhaoda Zhang, Yiqiang Liang, Nan Jiang, Xiaodong Pang, Yongchen Song, Yu Liu and Jiafei Zhao, Experimental study on flow and heat transfer performance of triply periodic minimal surface structures and their hybrid form as disturbance structure, Intl. Comm. in Heat and Mass Transfer 147 (2023) 106942.

Kaixin Yan, Junwei Wang, Liang Li, and Hongwu Deng, Numerical investigation into thermo-hydraulic characteristics and mixing performance of triply periodic minimal surface-structured heat exchangers, Applied Thermal Engineering 230 (2023) 120748.

Kaixin Yan, Hongwu Deng, Yewei Xiao, Junwei Wang, and Yaoyuan Luo, Thermo-hydraulic performance evaluation through experiment and simulation of additive manufactured Gyroid-structured heat exchanger, Applied Thermal Engineering 241 (2024) 122402.

Kaixin Yan, Hongwu Deng, Yewei Xiao, Junwei Wang, Yaoyuan Luo, and Jiaqi Yan, Influence of polishing process on surface morphology and thermo-hydraulic performance of additively manufactured Gyroid-structured heat exchanger, Applied Thermal Engineering 253 (2024) 123828.

Wenjing Yang, Jia An, Chee Kai Chua, and Kun Zhou, Acoustic absorptions of multifunctional polymeric cellular structures based on triply periodic minimal surfaces fabricated by stereolithography, Virtual and Physical Prototyping 15 (2020) 242-249.

Kirttayoth Yeranee and Yu Rao, A review of recent investigations on flow and heat transfer enhancement in cooling channels embedded with triply periodic minimal surfaces (TPMS), Energies 15 (2022) 8994.

Zheng Yinzheng, Numerical analysis on fluid-solid coupling cooling of minimal surface lattice structure, J. Phys.: Conf. Ser. 1187 (2019) 032070.

Chaoqun Zeng and Wei Wang, Modeling method for variable and isotropic permeability design of porous material based on TPMS lattices, Tribology Intl. 176 (2022) 107913.

Xiang Zhang, Ratnesh Tiwari, Amir H. Shooshtari, and Michael M. Ohadi, An additively manufactured metallic manifold-microchannel heat exchanger for high temperature applications, Applied Thermal Engineering 143 (2018) 899-908.

Tao Zhang, Fei Liu, Kaifei Zhang, Miao Zhao, Hailun Zhou, and David Z. Zhang, Numerical study on the anisotropy in thermo-fluid behavior of triply periodic minimal surfaces (TPMS), Intl. J. of Heat and Mass Transfer 215 (2023) 124541.

Xiaokai Zhang, Hongyang Li, Hongsheng Dong, Yi Zhang, Mingrui Sun, and Yongchen Song, Thermal performance of phase change materials embedded in functional gradient triply periodic minimal surface structures, J. of Energy Storage 100 (2024) 113636.

Sijia Zou, Yanru Mu, Bingchu Pan, Guangyong Li, Lei Shao, Jianke Du, and Yuan Jin, Mechanical and biological properties of enhanced porous scaffolds based on triply periodic minimal surfaces, Materials and Design 219 (2022) 110803.